Overview
PENEBAR™ PRIMER enhances the bonding between a preformed sealant such as PENEBAR™ SW, and the concrete surface, aiding in the installation process.
Applications
- Concrete
- Metal
- PVC
Advantages
- Can be conveniently applied at the job site
- Can be applied to various substrates in horizontal, vertical, and overhead applications
- Can be applied to “green” concrete or to a damp surface
Physical properties
- Color: Bright orange
- Percent solids: 30% minimum
- Solvent type: Water
- Dry time at 25°C (77°F): 10 minutes
- Dry time at 4°C (40°F): 60 minutes
- Minimal application temperature: 4°C (40°F)
- Surface when dry: Tacky
Coverage
3.8 l (1 gallon) covers 240 m (787 ft). PENEBAR™ PRIMER actual coverage depends upon substrate porosity and absorption.
Installation
Using a brush apply PENEBAR™ PRIMER in a stripe with a minimum width of 50 mm (2 in) to the entire surface length to receive PENEBAR™ SW. Allow PENEBAR™ PRIMER to dry for 10 to 15 minutes at a temperature of 25°C (77°F) or longer when the temperature is lower. PENEBAR™ SW should be installed while PENEBAR™ PRIMER is tacky and within 3 hours after the primer has dried. If PENEBAR™ SW is not installed within 3 hours, reapply an additional coat of PENEBAR™ PRIMER.
Packaging
3.8 l (1 gallon) containers.
Storage and shelf life
When stored in a dry enclosed area off the ground at a minimum temperature of 7°C (45°F) in unopened, undamaged containers, shelf life is 12 months. DO NOT ALLOW TO FREEZE.